image description

Cushioning Roller Covering System

Apply a cushioning, shock absorbing, rugged and abrasion-resistant covering over 1.9″-2.0″ metal conveyor rollers quickly and easily without special tools, using heat shrink-to-fit technology


Foam Rubber Cushioning Tubes (supplied in 5-ft. lengths)

  • 1/4″ thick nitrile butadiene foam rubber provides a cushioning and bounce dampening surface
  • High-compression foam construction cushions weights of up to 40 pounds per square inch – A 10-inch roller supports loads of up to 400 pounds over its full length
  • Closed cell construction – Foam rubber will not absorb or transmit moisture or liquids used for sanitary wash-downs and maintenance
  • Easily cut to cover the exact length of the 1.9″-2.0″ roller
  • Minimal scrap waste – Odd lengths of foam rubber can be abutted over rollers and covered with VinylGuard

VinylGuard Protective Covering (supplied in 50-ft. spools)

  • VinylGuard shrink-to-fit covering is specifically diameter-sized to cover, secure and protect the foam rubber and provide a rugged, cushioned roller surface
  • 50 mils thick, VinylGuard conveyor roller covers are long-lasting and highly abrasion, chemical and oil resistant
  • Available in USFDA (21 CFR) Food-Grade VinylGuard for material handling equipment that complies with the Food and Drug Administration’s requirements for indirect contact with food
  • Technical Data:
    • Minimum Recommended Shrink Temperature: 100°C (212°F)
    • Operating Temperature Range: -20°C to 105°C (-4°F to 221°F)
    • Tensile Strength: 3,000 psi
    • Durometer: 85 Durometer Shore A
    • Storage: Heat sensitive – Store at 70°F or below
  • Made in the USA from the finest premium-grade, 100% virgin materials
  • Lead-free, RoHS compliant and flame retardant

Back to Top | Online Store

Standard VinylGuard Colors

3 standard colors for the cushioning, shock absorbing roller cover system

1 standard color for the Food-Grade USFDA (21 CFR) cushioning, shock absorbing roller cover system