image description

VinylGuard Roller Covering

VinylGuard Specifications

  • Standard VinylGuard roller cover sleeves are 50 mils (nearly 1/16 inch) thick
  • We can manufacture custom conveyor roller covers in thicknesses up to 100 mils (1/10 inch)
  • VinylGuard conveyor roller covers are long-lasting — a full 85 durometer hardness
  • VinylGuard covers for material handling equipment have been load tested and proven to last millions of cycles, thousands of hours
  • Tough, thick VinylGuard conveyor roller covers protect delicate surfaces from the damage caused by uncovered metal conveyor rollers
  • VinylGuard roller sleeves are custom-engineered for high performance and long service life in harsh, industrial manufacturing environments and highly corrosive areas
  • VinylGuard shrink-to-fit roller covers have excellent resistance to chemicals, oils, grease, acids, chlorinated cleansers, salt, salt water, moisture, fungus and corrosion
  • Non-marking VinylGuard covered rollers will not stain, rust, crack or peel and are easy to clean
  • VinylGuard’s Food-Grade USFDA 21 CFR conveyor roller covers for Food-Grade material handling equipment systems comply with stringent United States Food and Drug Administration’s requirements for indirect contact with food
  • VinylGuard roller sleeves are flame retardant, lead-free, RoHS compliant, environmentally friendly and safe and contain no hazardous materials

Back to Top | Online Store

VinylGuard Technical Data

Minimum Recommended Shrink Temperature: 100°C (212°F)

Operating Temperature Range: -20°C to 105°C (-4°F to 221°F)

Tensile Strength: 3,000 psi

Durometer: 85 Durometer Shore A

Storage: Heat sensitive — Store at 70°F or below

  • VinylGuard roller covers are made in the USA from the finest premium-grade,100% virgin materials
  • VinylGuard roller covers are flame retardant
  • VinylGuard roller covers are Lead-Free and RoHS compliant
  • VinylGuard conveyor roller and skatewheel covers for Food-Grade material handling equipment comply with the Food and Drug Administration’s USFDA 21CFR requirements for indirect contact with food

Back to Top | Online Store

Standard Colors (Custom colors available upon request)

4 standard colors for Conveyor Roller and Skatewheel Covers:

1 Standard Color for Food-Grade USFDA (21CFR) Conveyor Roller and Skatewheel Covers:

Back to Top | Online Store

Standard Sizes (Other sizes available upon request)

Standard size VinylGuard conveyor roller and skatewheel covers shrink to fit and tightly conform to the most popular sizes of conveyor rollers and skatewheels used in industrial conveyor systems

Straight Rollers
Outside Diameter of Conveyor Roller:
1.375″
1.9″
2.0″
2.5″
3″
4″
Tapered Rollers
Outside Diameter of Conveyor Roller:
WIDE END 2.5″
TAPERED END 1.5″ up to 2″
Skatewheels
All skatewheel covers are sized for an industry standard
5/8″ wheel face width
WHEEL DIAMETER
1.5″
1-15/16″ to 2″

Back to Top | Online Store